Design & Finish
Available in six finishes; Brass, Brushed Steel, Chrome, Copper, Gunmetal and Matt Black, this tap allows you to match or accent your cabinetry, sink or worksurface. The tap height is 292mm and the spout reach is 180mm, with a base diameter of 50mm and cut-out requirement of 35mm. Minimum system pressure is specified as 1 bar or above.

Key Features

• High clearance swivel spout for flexible use around deep bowls.
• Single-lever control for easy temperature and flow adjustment.
• WRAS approved for full compliance with UK plumbing standards.
• Colour options available to suit modern, transitional or heritage kitchens.
• Flow rates from approx. 3.25L/min at 0.5bar through to 10.6L/min at 5bar.

Performance & Practicality
With its swivel spout and generous clearance, the HS140 makes filling pans, rinsing dishes and using large cookware simpler. The single-lever mechanism enables one-hand operation, which is particularly useful in busy kitchens. The finish options provide flexibility, from sleek chrome to dramatic gunmetal, to tie in with your overall scheme.

Installation & Compatibility
This tap requires a 35mm cut-out and supports a base diameter of 50mm. Check your cabinet and sink design to ensure the 292mm height and 180mm spout reach fit your workspace without causing splash back. Minimum recommended pressure is 1 bar.

Style Tip
Pair the HS140 with a stainless steel, granite or ceramic sink and select a complementary finish: choose Gunmetal or Matt Black for a bold modern look, or Copper or Brass for a warm, distinctive accent. Its quilt-range heritage means it will sit well in both premium and bespoke kitchen environments.